安美優質抗磨液壓油QH-HM
安美優質抗磨液壓油QH-HM為優質抗磨液壓油，選用高質量異構脫臘的石蠟基礦物油和性能優良的添加劑精心調配而成。特效抗磨、分離微量水專利技術，具有提供長效使用壽命特點。其質量超越國標 L-HM 級質量要求。符合全球各主要液壓設備制造商質量要求。
液壓油好不好，就看這14個技術指標，工廠不花冤枉錢！
發布者：安美集團 發布日期： 閱讀量：185次
如果您是工廠老板或者采購，或許您也遇到過這樣的問題：面對市面上讓人眼花繚亂的液壓油不知如何抉擇，在銷售的一頓鼓吹之下，不知不覺就被“套路”，采購了劣質液壓油，輕則設備“生病”重則“癱瘓”！
安美深耕油液領域22年，深知客戶液壓油采購?fù)袋c(diǎn)，特整理液壓油檢測技術指標，讓客戶清晰分辨優質液壓油，不花冤枉錢。
If you are a factory owner or purchaser, you may have encountered this problem: facing the dazzling variety of hydraulic oils on the market and not knowing how to choose, you unknowingly get "tricked" by aggressive sales pitches and end up purchasing inferior hydraulic oil, which at best causes equipment to "malfunction" and at worst leads to "paralysis"!
Amer has been deeply engaged in the oil field for 22 years and fully understands the pain points of customers in hydraulic oil procurement. We have specially compiled hydraulic oil testing technical indicators to help customers clearly distinguish high-quality hydraulic oil and avoid unnecessary expenses.
液壓油檢測14個技術指標
Hydraulic oil testing for 14 technical indicators
在一定溫度、轉速下，四球機的鋼球在潤滑狀態下不發生卡咬的最大負荷，此指標測量值越高，說明液壓油潤滑性能越好。
At a certain temperature and rotational speed, the maximum load at which the steel balls of the four-ball machine do not seize under lubrication conditions is measured. The higher this value, the better the lubricating performance of the hydraulic oil.
在一定溫度、轉速下逐級增大負荷，當四球機上方鋼球和下方鋼球因負荷過重而發生高溫?zé)Y(jié)，設備不得不停止運轉的負荷即燒結負荷，燒結負荷越高，說明液壓油的極壓潤滑性能越好。
Under a certain temperature and rotational speed, the maximum load at which the steel balls of the four-ball machine do not seize under lubrication; the higher the measured value of this indicator, the better the lubrication performance of the hydraulic oil.
在一定溫度、轉速、負荷和運轉時間下，四球機下方承重鋼球表面因摩擦導致磨損斑痕直徑的大小即磨斑，磨斑越小，說明液壓油的抗磨損能力、潤滑性越好。
Under certain temperature, rotational speed, load, and operating time, the diameter of the wear scar on the surface of the lower load-bearing steel ball caused by friction in the four-ball machine is called the wear scar. The smaller the wear scar, the better the hydraulic oil's anti-wear ability and lubricity.
評估液壓油形成油膜隔離摩擦副的能力，降低能量損耗，摩擦系數越低證明液壓油抗磨性能越好。
Evaluate the ability of hydraulic oil to form an oil film that isolates friction pairs and reduces energy loss. A lower friction coefficient indicates better anti-wear performance of the hydraulic oil.
酸值表示液壓油中有機酸和無機酸的總含量。中和1g油樣所需的氫氧化鉀毫克數稱為總酸值，單位 mgKOH/g。酸值大，表示其有機酸含量高，有可能對機械零件造成腐蝕。
另外，液壓油在貯存和和使用過程中被氧化變質，酸值也會逐漸變大，常用酸值變化大小來衡量潤滑油的氧化安定性，或作為換油指標（酸值與新油相比增加超過0.3即可換油）。
The acid value represents the total content of organic and inorganic acids in the hydraulic oil. The total acid value, expressed in mgKOH/g, is the amount of potassium hydroxide in milligrams required to neutralize 1 gram of oil sample. A high acid value indicates a high content of organic acids, which may cause corrosion to mechanical parts.
Additionally, hydraulic oil oxidizes and deteriorates during storage and use, causing the acid value to gradually increase. The change in acid value is commonly used to measure the oxidation stability of the lubricant or as an oil change indicator (an increase of more than 0.3 compared to new oil indicates the need for an oil change).
油品在標準規定的條件下冷卻時，能夠繼續流動的最低溫度稱為傾點，不能流動的最高溫度稱為凝點，二者通常差3℃。
測定樣品的凝點時,將試樣裝在規定的試管中，并冷卻到預期的溫度時，將試管傾斜45°，經過1min，觀察液面是否移動，記錄試管內液面不流動時的最高溫度作為凝點。
傾點高的液壓油，不能在低溫下使用，否則由于潤滑油在低溫下失去流動性，堵塞油路不能保證潤滑。
The pour point is the lowest temperature at which the oil can still flow when cooled under standard conditions, while the cloud point is the highest temperature at which the oil ceases to flow; the two usually differ by about 3°C.
When determining the cloud point of a sample, the sample is placed in a specified test tube and cooled to the target temperature. The test tube is then tilted at 45°, and after 1 minute, the liquid surface is observed. The highest temperature at which the liquid surface inside the test tube does not move is recorded as the cloud point.
Hydraulic oil with a high pour point cannot be used at low temperatures; otherwise, the lubricant will lose fluidity at low temperatures, blocking oil passages and failing to ensure lubrication.
抗乳化性好的液壓油，遇水后，雖經攪拌振蕩，也不易形成乳化液，或雖形成乳化液但是不穩定，易于迅速分離。
若液壓油中的機械雜質較多，或含有皂類、酸類及生成的油泥等，在有水存在的情況下，液壓油就容易乳化，抗乳化性差的油品，其抗氧化安定性也差。
Hydraulic oil with good anti-emulsification properties does not easily form emulsions after contact with water, even after stirring or shaking, or if emulsions do form, they are unstable and separate quickly.
If the hydraulic oil contains a large amount of mechanical impurities, or contains soaps, acids, and generated sludge, the hydraulic oil is prone to emulsification in the presence of water. Oils with poor anti-emulsification properties also have poor oxidative stability.
粘度就是液體的內摩擦，絕大多數的潤滑油是根據其粘度來分級的，是各種機械設備選油的主要依據。運動粘度的單位是mm2/s，通常用厘斯(cSt)。
企業選擇液壓油粘度時，需要根據液壓系統的工作溫度、壓力、元件類型等因素確定合適的粘度范圍。高溫環境下應選用粘度較高的液壓油，如68號（cst），低溫環境下，應選擇粘度較低的液壓油，如32號（cst），或低溫抗磨液壓油。
安美可提供不同粘度的耐高低溫優質液壓油，企業可根據生產環境選擇，既能滿足高溫作業需求，也能兼容低溫工況。
Viscosity is the internal friction of a liquid. The vast majority of lubricants are classified based on their viscosity, which is the main criterion for selecting oil for various mechanical equipment. The unit of kinematic viscosity is mm2/s, commonly expressed in centistokes (cSt).
When selecting the viscosity of hydraulic oil, enterprises need to determine the appropriate viscosity range based on factors such as the operating temperature, pressure, and component types of the hydraulic system. In high-temperature environments, hydraulic oils with higher viscosity, such as ISO VG 68 (cSt), should be chosen. In low-temperature environments, oils with lower viscosity, such as ISO VG 32 (cSt), or low-temperature anti-wear hydraulic oils should be selected.
Anmei can provide high-quality hydraulic oils with various viscosities that are resistant to both high and low temperatures. Enterprises can select according to their production environment, meeting the demands of high-temperature operations while also being compatible with low-temperature conditions.
粘度指數可以用來衡量潤滑油粘度受溫度變化影響的程度。它的值越高則說明粘度受溫度影響越小，液壓油在冷熱環境下都能保持更穩定的粘度，粘度指數越低則說明粘度受溫度影響越大。
The viscosity index measures the extent to which the viscosity of a lubricant is affected by temperature changes. The higher the value, the less the viscosity is influenced by temperature, allowing the hydraulic oil to maintain more stable viscosity in both hot and cold environments. Conversely, a lower viscosity index indicates greater sensitivity of viscosity to temperature changes.
在規定的條件下加熱，當油溫達到某溫度時，液壓油的蒸汽和周圍空氣的混合氣，一旦與火焰接觸，即發生閃火現象，最低的閃火溫度稱為液壓油的閃點。
閃點是液壓油的貯存、運輸和使用的一個安全指標，也是潤滑油的揮發性指標。閃點低的潤滑油，揮發性高，容易著火，安全性較差。企業應選擇閃點比使用溫度高 20-30℃的液壓油。
Under specified conditions, when the oil is heated to a certain temperature, the mixture of hydraulic oil vapor and surrounding air will ignite upon contact with a flame. The lowest temperature at which this flash occurs is called the flash point of the hydraulic oil.
The flash point is a safety indicator for the storage, transportation, and use of hydraulic oil, as well as a measure of the volatility of the lubricant. Lubricants with low flash points have high volatility, are prone to ignition, and have poorer safety. Enterprises should select hydraulic oils with flash points 20-30°C higher than the operating temperature.
水分表示油品含水量的多少，用質量百分比表示。正常情況下，油品不應含水分，若水分含量小于0.03%，則認為是痕量水分，若沒有水分時，認為是無。
水分存在，將破壞液壓油膜，使?jié)櫥Ч儾?，加速油中有機酸值對金屬的腐蝕作用，造成對機械設備的銹蝕，并導致油中的添加劑失效，水分存在時液壓油乳化的可能性加大。
Moisture indicates the water content in the oil, expressed as a mass percentage. Under normal circumstances, the oil should contain no moisture; if the moisture content is less than 0.03%, it is considered trace moisture, and if there is no moisture, it is regarded as none.
The presence of moisture will damage the hydraulic oil film, deteriorate the lubrication effect, accelerate the corrosion of metals by organic acid values in the oil, cause rust on mechanical equipment, and lead to the failure of additives in the oil. When moisture is present, the possibility of hydraulic oil emulsification increases.
液壓油中不溶于汽油或苯的沉淀和懸浮物，經過濾而分出的雜質，稱為機械雜質。
液壓油的機械雜質來源主要是潤滑油在使用、貯存和運輸中，混入外來物，如灰塵、泥沙、金屬碎屑、金屬氧化物和銹末等。機械雜質越多，液壓系統磨損、拉傷、劃痕、堵塞油路、油嘴、濾油器。當液壓油機械雜質大于0.1%就達到了換油標準。
Mechanical impurities refer to the precipitates and suspensions in hydraulic oil that are insoluble in gasoline or benzene and are separated by filtration.
The sources of mechanical impurities in hydraulic oil mainly come from foreign substances mixed into the lubricating oil during use, storage, and transportation, such as dust, sand, metal debris, metal oxides, and rust particles. The more mechanical impurities there are, the more wear, scoring, scratching, and blockage of oil passages, nozzles, and filters occur in the hydraulic system. When the mechanical impurities in hydraulic oil exceed 0.1%, it reaches the oil change standard.
如果油品的抗泡性不好，在液壓系統中形成了很多泡沫，而且不能迅速破除，則將影響液壓油的潤滑性，增強它的氧化速度，影響液壓系統壓力傳遞。
If the oil has poor anti-foaming properties, many bubbles will form in the hydraulic system and cannot be quickly eliminated, which will affect the lubrication of the hydraulic oil, accelerate its oxidation rate, and impact the pressure transmission of the hydraulic system.
腐蝕試驗是測定油品在一定溫度下對金屬的腐蝕作用。把一塊已磨光好的銅片浸沒在一定量的液壓油樣中，并按產品標準要求加熱到指定的溫度，保持一定的時間。取出銅片，經洗滌后與腐蝕標準色板進行比較，確定腐蝕級別。
The corrosion test measures the corrosive effect of the oil on metal at a certain temperature. A polished copper strip is immersed in a specified amount of hydraulic oil sample, heated to the designated temperature according to product standards, and maintained for a certain period. The copper strip is then removed, washed, and compared with a corrosion standard color chart to determine the corrosion level.
正確選用液壓油，關乎液壓系統的運行效率與壽命。安美液壓油，權威認證，值得信賴，具有優異的抗磨、防銹、防腐蝕、防沉積物生成的能力，直擊用油痛點，登錄安美商城，線上采購安美液壓油，呵護液壓系統平穩運行。
Choosing the right hydraulic oil is crucial to the operational efficiency and lifespan of the hydraulic system. Anmei Hydraulic Oil, with authoritative certification, is trustworthy and possesses excellent anti-wear, anti-rust, anti-corrosion, and anti-deposit formation capabilities. It directly addresses oil usage pain points. Visit the Anmei Mall to purchase Anmei Hydraulic Oil online and ensure the smooth operation of your hydraulic system.
編輯 | 丁當
